OO-S-2822
REQUIREMENTS
3.
3.1 Description. The mobile saw assembly shall be either of two types
consisting of an electric motor driven, 16-inch (406.4 millimeter (mm)) diameter
saw blade 1-inch (25.4 mm) diameter arbor, radial overarm, woodworking saw and
other accessories specified herein; type I shall be furnished with a diesel
engine driven power supply; type II shall be the same as type I but without the
diesel engine driven power supply. The equipment shall be mounted on a
two-wheeled, pneumatic tired, single axle, fully suspended undercarriage.
3.2 Standard commercial product. The mobile saw offered shall be in
accordance with the requirements of the specification and shall be the standard
product of the contractor and shall have been marketed and in commercial field
use for at least one year prior to the date of bid opening. Product
improvements are acceptable. When specific requirements are not stated herein,
all items listed as standard equipment in the contractor's published
specification brochures and catalogs, or normally furnished to commercial
customers as standard equipment, shall be furnished. The item shall be
equipment with optional equipment as specified herein. Optional equipment is
defined as equipment not standard with the item but which has been furnished to
the commercial customer, for the purpose intended such as special features or
allied equipment. The item shall be equipped with all components necessary to
enable it to function reliably and efficiently in sustained operation. The item
shall conform to all federal laws and regulations applicable to the manufacturer
governing safety and pollution which are in effect for this type of equipment at
the time of manufacture. Upon the request of the contracting officer, the
offerer/contractor shall provide sales data verifying that the basic
configuration offered under this solicitation has been sold on the commercial
market and meets the definition set forth in FAR 11.001 for a "commercial
product" or "commercial-type product." In addition, the contracting officer may
require submission of published specifications in order to verify conformance of
equipment to the specification requirements of this solicitation.
3.3 First article. When specified in the contract or purchase order, a
sample shall be subjected to first article inspection (see 4.2.1 and 6.3).
3.4 Materials. Materials used shall be free from defects which would
adversely affect the performance or maintainability of individual components or
of the overall assembly. Materials not specified herein shall be of the same
quality used for the intended purpose in commercial practice. Unless otherwise
specified herein, all equipment, material, and articles incorporated in the work
covered by this specification are to be new and fabricated using materials
produced from recovered materials to the maximum extent possible without
jeopardizing the intended use. The term "recovered materials" means materials
which have been collected or recovered from solid waste and reprocessed to
become a source of raw materials, as opposed to virgin raw materials. None of
the above shall be interpreted to mean that the use of used or rebuilt products
are allowed under this specification unless otherwise specified.
All mobile saw assemblies of the same
3.5 Interchangeability.
classification furnished with similar options under a specific contract shall be
identical to the extent necessary to insure interchangeability of component
parts, assemblies, accessories, and spare parts.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business